This is known as a redundant RPS6U rack power supply configuration
Item NO.:
RPS6U 200-582-600-01Payment:
T/TMarket Price:
$5000Product Origin:
SwizerlandProduct weight:
2.4kgLead Time:
In stockShipping Port:
Xiamen
|
» Description |
| Manufacture | Vibration |
| Model | RPS6U |
| Product ID | 200-582-600-013 |
| Catalog | Vibration Monitoring |
| Description | RPS6U 200-582-600-013 rack power supplies |
| Country of Origin | Swizerland |
| Dimension | 262mm*60.6mm*190mm |
| Weight | 2.4kg |
1. In 2016, the RPS6U rack power supply was improved to provide a higher output power of 330 W with higher-performance
and higher-efficiency, which required a redesign of the underlying power supply circuitry.
Accordingly, the different versions of the RPS6U rack power supply in use are:
• Later versions of the RPS6U (PNR 200-582-x00-02h or later) that define the power as a total maximum output power
of 330 W, with nominal output (supply) voltages of +5 VDC up to 50 A, +12 VDC up to 8 A and −12 VDC up to 4 A.
Note: The total maximum output power of 330 W is a combination load for all outputs as the +5 VDC and ±12 VDC outputs
are usually not simultaneously loaded to the maximum in practice. For example, if the +5 VDC output is at its maximum
rated load (5.35 V × 50 A = 267.5 W), then the combined loads on the +12 VDC and −12 VDC outputs must not
exceed 62.5 W.
• Earlier versions of the RPS6U (PNR 200-582-x00-01h or earlier) that define the power as a rated power of 300 W,
with nominal output (supply) voltages of +5 VDC up to 35 A, +12 VDC up to 6 A and −12 VDC up to 2 A.
2. In 2021, VM600Mk2 (second-generation) machinery monitoring systems were launched with improved rack modules,
notably the MPC4Mk2 + IOC4Mk2, RLC16Mk2 and CPUMMk2 + IOCNMk2. VM600Mk2 systems use the same system infrastructure
as first-generation VM600 systems, that is, VM600Mk2 is backward compatible with existing VM600 (VM600Mk1) racks and
power supplies.
However, VM600Mk2 versions of the ABE040 system rack (PNR 200-040-100-016) and RPS6U rack power supplies
(PNRs 200-582-200-12h, 200-582-500-12h and 200-582-600-12h) are also available. The VM600Mk2 versions are the same as the
latest VM600 versions, except for the specific artwork/branding/finish. More specifically, the front panels of RPS6U rack
power supplies are bare aluminium for the VM600Mk2 versions (PNRs 200-582-200-12h, 200-582-500-12h and 200-582-600-12h)
and painted for the VM600 versions (PNRs 200-582-200-02h, 200-582-500-02h and 200-582-600-02h).
RPS6U rack power supplies 200-582-600-013 Datasheet
Warranty
Delivery Time
The MPC4 machinery protection card is the central element in the VM600 series machinery protection system (MPS)
check the details
The MPC4 cards are highly suitable for machinery protection in a wide range of industrial applications.
check the details
The ‘safety’ MPC4 card, also known as the MPC4 SIL, was developed to permit a wider range of installation options.
check the details
The IOC4T input /output card acts as a signal interface for the series MPC4 machinery protection card
check the details
The IOC4T operates in slave mode and communicates with the MPC4
check the details
The IOC4T contains four local relays that can be attributed to any specific alarm signals under software control.
check the details
One RPS6U rack power supply powers a full rack of modules (cards)
check the details
Two RPS6U rack power supplies enable rack power supply redundancy
check the detailsSignup our newsletter to get update information, promotion and insight.
IPv6 network supported
English 
Get A Quote
