The IOC4T operates in slave mode and communicates with the MPC4
Item NO.:
IOC4T 200-560-000-11Payment:
T/TMarket Price:
$2150Product Origin:
SwizerlandProduct weight:
0.25kgLead Time:
In stockShipping Port:
Xiamen
|
» Description |
| Manufacture | Vibration |
| Model | IOC4T |
| Product ID | 200-560-000-114 |
| Catalog | Vibration Monitoring |
| Description | IOC4T 200-560-000-114 input/output card |
| Country of Origin | Swizerland |
| Dimension | 262mm*20mm*125mm |
| Weight | 0.25kg |
The IOC4T card protects all inputs and outputs against electromagnetic interference (EMI) and signal surges and also meets electromagnetic compatibility (EMC) standards.
The IOC4T connects the raw dynamic (vibration) and speed signals from the sensors to the MPC4. These signals, once processed, are passed back to the IOC4T and made available on the terminal strip on its front panel (rear of VM600). For the dynamic signals, four on-board digital-to-analog converters (DACs) provide calibrated signal outputs in the range 0 to 10 V. In addition, four onboard voltage-to-current converters allow the signals to be provided as current outputs in the range 4 to 20 mA (jumper selectable).
The IOC4T contains four local relays that can be attributed to any specific alarm signals under software control. For example, these may be used to signal an MPC4 fault or a problem detected by a common alarm (Sensor OK, Alarm and Danger) in a typical application.
|
IOC4T input/output card for MPC4 cards 200-560-000-013 Datasheet
Warranty
Delivery Time
The MPC4 machinery protection card is the central element in the VM600 series machinery protection system (MPS)
check the details
The MPC4 cards are highly suitable for machinery protection in a wide range of industrial applications.
check the details
The ‘safety’ MPC4 card, also known as the MPC4 SIL, was developed to permit a wider range of installation options.
check the details
The IOC4T input /output card acts as a signal interface for the series MPC4 machinery protection card
check the details
The IOC4T contains four local relays that can be attributed to any specific alarm signals under software control.
check the details
One RPS6U rack power supply powers a full rack of modules (cards)
check the details
Two RPS6U rack power supplies enable rack power supply redundancy
check the details
This is known as a redundant RPS6U rack power supply configuration
check the detailsSignup our newsletter to get update information, promotion and insight.
IPv6 network supported
English 
Get A Quote
